A speed test run on your phone, from the couch, over Wi-Fi, mostly measures your Wi-Fi. If you want to know whether you're getting the speed you pay for, you need up to three tests in a set order: one at the modem, one at the router, and one where you actually use the internet. Comparing the three tells you whether the slowdown is the line, the router or the room.
This is the same method oxio's own support team walks customers through, and it's worth knowing whoever your provider is. Done once, it takes about fifteen minutes and it turns "the internet is slow" into a number support can act on.
Why does one speed test lie?
Your connection has three legs, and a speed test only reports the slowest one:
- The line: the cable or fibre from the street to your modem. This is what your plan speed describes.
- The router: the box that shares the connection with your devices.
- The last few metres: Wi-Fi through walls, or an Ethernet cable, to the device you're holding.
oxio's help centre is unusually frank about the third leg. Its article on higher internet speeds says the routers it provides deliver Wi-Fi speeds of 400 to 500 Mbps, while a device wired to the router can reach up to 1 Gbps. So on a 1 Gbps plan, a Wi-Fi result in the 400s isn't a fault. It's the ceiling of Wi-Fi from that router, and you'd only see the full number on a cable.
The three-test method, step by step
Before you start, check status.oxio.ca (or your own provider's outage page) for a known problem in your area. oxio's article How do I check for speed issues with my internet? makes that step one, and it saves you troubleshooting something that isn't in your home.
- Test at the modem. Unplug the router from the modem. Plug a laptop straight into the modem with an Ethernet cable, turn on airplane mode so the laptop can't fall back to Wi-Fi, then run speedtest.net. oxio's monitoring tools article says this shows the raw speed your modem is receiving from the line. Write down download and upload.
- Test at the router. Reconnect the router. If you have the oxio Wi-Fi app (Adtran 841 or oxio Wi-Fi pod), go to Network and run the speed test under the Connectivity tab. On an eero, open the app, tap Activity, then Speed, then Run Speed Test. oxio says this measures the speed the router receives from the modem, before anything travels over Wi-Fi.
- Test where you actually use it. Now run speedtest.net on the device that feels slow, in the room where it feels slow. Run it twice, a few minutes apart.
- Check your cable. If you tested with a cable, look at the printing on it. oxio recommends Cat5e or higher for speeds up to 1 Gbps. An old cable from a drawer can cap a wired test well below your plan.
How to read the three numbers
Compare each test with your plan speed and with each other. oxio's article says the wired and app tests should land at or very close to your plan.
- Modem test low: the problem is the line or the modem, not your home network. That's a support call, and you now have the number to prove it.
- Modem test fine, router test low: the router or its connection to the modem is the suspect. Check the cable between them and that the router's software is current.
- Modem and router fine, room test low: it's Wi-Fi in that room. That's the most common result, and the fix is in your home, not on the line.
- Everything low at one time of day only: run the same tests at another hour and keep both results. A pattern by time of day is useful information for support.
A worked example
Say you're on a 500 Mbps plan and Netflix stutters in the back bedroom. Your phone test in that bedroom shows 140 Mbps. The laptop on the modem shows 490 Mbps, and the router's app test shows 480 Mbps.
The line and the router are both delivering the plan. The 350 Mbps gap appears only in the last few metres, between the router and the bedroom. Calling support about "slow internet" would get you nowhere, because there's nothing wrong upstream. The fixes are local: move the router into the open, or get a wired or extra access point closer to that room.
Now flip it. Say the laptop on the modem shows 90 Mbps on that same 500 Mbps plan. That's a line problem, and no amount of router shuffling will fix it. This is when you call.
What to do with the result
If it's your Wi-Fi
- Move the router. oxio's higher-speeds article says to put it in the open, away from electronics, metal and mirrors, and that one router typically covers up to about 1,500 square feet.
- Wire what doesn't move. A desktop, game console or TV that never leaves its spot is better on a cable. The same article says a wired connection is always better, and the order to follow is modem, then router, then any Ethernet switch, never a switch straight off the modem.
- Give the important device priority. On the Adtran 841 or oxio Wi-Fi pod, turn on Traffic boost on the Network page of the app for that device. On an eero 6, oxio points to eero Labs' "Optimize for Conferencing and Gaming" setting.
- Bigger home, more coverage. oxio's article lists extra routers at $6 a month each, up to three, for homes one router can't cover.
If it's the line
oxio's speed-issues article lays out the order: factory reset the modem (hold the reset button for 30 seconds, then give it 10 minutes), make sure the router's software is current, test again, and if it's still slow, contact tech support. Send three things in your first message: the steps you've already done, photos of your equipment setup, and your speed test results. Having the modem test result in hand is what makes that conversation short.
Do you even need more speed?
Run the three tests before you pay for an upgrade. If the line is delivering your plan and the slowdown is in one room, a faster plan won't change what that room sees.
It also helps to know what everyday use actually needs. oxio's higher-speeds article puts HD streaming at 5 to 10 Mbps and a video call at about 5 Mbps, so all of that at once is around 16 Mbps. Its What internet speed do I need? article says video calling services generally ask for less than 3 Mbps of upload. Most "slow internet" in a home with a decent plan is a Wi-Fi problem, not a plan problem.
Where oxio fits
What we like about doing this on oxio is that the fix is never locked behind a contract. The same speed article says you can change speed as often as you like at no charge, so if your tests show you're paying for more than your home can use, you can drop a tier, and if you really are maxing out the line, you can go up. There's no term contract either way, and activation, installation and shipping are $0 with the equipment included. If you're switching, enter at signup and your first month is free.
Sources
- oxio Help Centre: How do I check for speed issues with my internet?
- oxio Help Centre: What tools can I use to monitor my internet connection?
- oxio Help Centre: What things should I consider with oxio's higher internet speeds?
- oxio Help Centre: What internet speed do I need?
- oxio Help Centre: Are there activation, installation or basic equipment fees?
- oxio: Internet plans and FAQ
- oxio: Service status